成都华通伟业机械设备有限公司

线材抛丸清理机

本系列设备采用全防护无底坑设计,配置线材专用强力内置抛丸器,易损部件少,更换简单快捷,生产效率极高,生产效率高,利用本机抛丸后的线材表面呈现均匀的粗糙度,增加铝包铜包的附着力,使包层均匀永不脱落,消除线材拔丝过程中产生的内应力,增加线材表面的抗拉强度以及抗应力腐蚀开裂性能。

This series equipment uses all protects and the non-pit design,and is disposition wire rods special-purpose force built-in impeller heads,the wearing parts are few,the replacement is simple quickly,the production efficiency is extremely high.it presents even roughness of the wire rods surface after shot blasting.which increases an aluminum package of copper,causes the envelope even never fall off,eliminates the interval stress which in the wire rods when drawing process produces,increases the tensile strength as well as the anti-stress corrosion dehiscence performance of the wire rods’surface,obtains the permanence service life

技术参数 Technical parameters

名称

线材抛丸清理机

型号

FQ II

FQ44H

线材尺寸

5.5~Φ40

Φ6~Φ24

处理速度

MA×120

22~150

抛丸器数理

4

4

抛丸器功率

4×18.5

4×22

总功率

100

162.75

外形尺寸

3440×1575×3630

3200×1800×4500

版权所有© 成都华通伟业机械设备有限公司    蜀ICP备16014321    技术支持: 新丝路网络